How To Access Window Weights
If your sometime house has double-hung windows, you'll demand to know how to get to the sash cords for maintenance or repair. Window sash cords become frayed or broken or disconnected from the weights that requite balance to the window. These mechanisms also demand to exist periodically lubricated and maintained to prevent issues.
Gather your materials: Razor blade or utility knife, stiff putty knife, hammer, screwdriver.
No running with knives allowed! Exercise be conscientious when handling sharp (or pointed) objects.
Score the caulk and paint around each window finish.
Cut between the window stop (the trim along the inside of the window frame) and the frame itself with a razor bract or utility knife.
Remove the stops from both sides of the window.
Start at the bottom and work your fashion upwardly, tap the putty knife to pry the cease loose wherever there's a boom. Remove the nails later on they're loosened from the sash.
Exist careful when removing the window stops and trim. Trim pieces can intermission easily if you utilise besides much force.
Remove the metal track from the lower side of each window, if necessary.
Some windows have a metal track on each side for the window to slide along. Employ the putty knife to gently pry the track free.
Push button the lower sash up and lift information technology out of the window frame.
Push the lower sash up high enough to clear the windowsill and lift it out of the window frame by pulling the bottom toward you.
Disassemble the cord from its slot on each side of the lower sash.
The cords are attached near the meridian of each side of the lower sash.
Remove the parting strip from each side of the window.
Use the putty knife to gently pry the parting strip loose from each side of the window frame.
Remove the access plate from each side of the lower jamb.
Unscrew the access plate (sash-weight pocket encompass) and ready information technology bated. If the jambs don't take access plates, remove the window casing to become at the cords, weights, and pulleys.
Take out the weights from each side of the jamb.
Pull the weights out of the access pocket.
Remove the upper sash.
Y'all'll see the weight pulleys on each side of the upper jamb.
Make clean out whatsoever debris from inside the access panel.
Now you're set to take care of your cords. When you are finished, follow the contrary process to put the window back together.
About This Article
This article can exist found in the category:
- General (Home Improvement & Appliances) ,
Source: https://www.dummies.com/article/home-auto-hobbies/home-improvement-appliances/general-home-improvement-appliances/how-to-access-window-sash-cords-in-double-hung-windows-206804/
Posted by: lieberknespolow.blogspot.com
0 Response to "How To Access Window Weights"
Post a Comment